[Unknown] MIO1025
Logs
typeType
Floppy controller Multi I/O IDE controller
interfaceInterface
signalSignaling
16-bit ISA
dimSlot height
1
datePCI ID
Empty
fccFCC ID
HBQ4MC8635
chip Chips and specs
-> Signal transmitter/receiver -> Super I/O
MTL
Size: Half-length, half-height card
Data bus: 16-bit, ISA
HadProblem
Hard drive supported: Two IDE (AT) Interface drives
Floppy drives supported: 360KB, 720KB, 1.2MB, 1.44MB
portintI/O ports
1x 
  • 2x17 2.54mm pin header
1x 
  • 2x8 2.54mm pin header
1x 
  • 2x20 2.54mm pin header
1x 
  • DB-25
1x 
  • DE-9
1x 
  • 2x5 2.54mm pin header
powerPower connectors
Empty
notes Notes

FCC ID is for the chips not for the card and there should be an U instead of 4 in that string.

Last updated 2025-09-22T19:44:30Z
biosc No BIOS files available
drv No drivers available
doc No card documents available

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.