Packard Bell PB300/PB320 (REV. A)
25MHz
LPX (max 229 x 330 mm)
230mm x 220mm
256KB
None/Integrated in the CPU
5MB
30-pin SIMM
- Packard Bell PCB-8961 REV.0J
- Packard Bell 386SX-II (PCB8961)
1x
Floppy interface
1x
Gameport
1x
IDE interface
1x
PS/2 keyboard
1x
PS/2 mouse
1x
Parallel
1x
Serial
1x
VGA
1x
16-bit ISA
- Leaky Ni-Cd clock battery
The Ni-Cd battery may be leaking, risking damage to PCB layers & nearby components. Promptly remove the battery & clean corrosion/alkaline salts from the board. Use white vinegar to dissolve salts, but exercise caution as vinegar can corrode exposed metals. A thorough examination & repair may be needed. Replace battery with guide: https://github.com/wiretap-retro/Not-A-Varta
- Expansion slots are on proprietary riser
The listed slots are on the riser card that came with the motherboard.
If you have this board make sure you have the riser for it.
Has 3 ISA slots on the riser card.
Last updated 2025-12-14T15:43:51Z
Board info score is 9/10
-> Chipset part
-> Human Interface
-> RAMDAC
-> Real-Time Clock
-> Signal transmitter/receiver
-> Super I/O
-> Video
Phoenix - 4 entries
POST string
Note
Core Ver.
BIOS Ver.
Logs
POST string
Note
VGA ROM was taken from a 1.10.1113 set. Tested OK.
Core version
386 PLUS 1.10
BIOS version
Logs
Release date
File
Logs
Chip
Release date
File
Logs
Chip
Release date
1995-11-30
File
Logs
Chip
Release date
1988-10
File
Logs
Chip
Release date
1995-11-22
File
Logs
Chip
Release date
1994-07
File
Logs
Chip
Release date
1996-01
File
Logs
Disclaimer
The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.