This BIOS is ONLY for the EVGA P67 motherboard it was downloaded for

A116 Updates:

    * Ability to customize BIOS profile names
    * Updated CPU Microcode
    * Updated ME firmware to 7.1.13.1088
    * Updated Intel RAID ROM to v10.5.0.1034
    * Remove VT-d option (unsupported by chipset)
    * Set default VCore in Manual mode from 900mV to 1200mV
    * Correct "DIMM Voltage does not reset back to default setting when set to Auto"
    * Display all DRAM timings in BIOS setup
    * Remove OCP and ICC limitation
    * Now you can manually type in VCORE and DIMM voltage
    * Fix "ACPI Sleep State item does not work when Hibernation is disabled" issue
    * Add E-SATA control item
    * Change BOARD SERIAL NUMBER in BIOS 0.1 to 1.1
    * Add IO Latency control
    * Add Round Trip Latency control
    * BIOS cosmetic updates

This package contains the necessary Flash Tool and ROM file to Flash your EVGA Motherboard. Please check to ensure that you downloaded the right package for your motherboard.


This flash is designed for Windows 32Bit/64Bit or DOS mode.

    * First go into your BIOS and load defaults, save and exit
    * Go into the folder where you unzipped this package and run the appropriate batch file.
          o For Windows XP, Vista or 7 32Bit: AFUWIN32.BAT
          o For Windows XP, Vista or 7 64Bit: AFUWIN64.BAT
          o If in DOS Mode: AFUDOS.BAT 
    * Press Y in CAPITAL LETTERS to start the flash process
    * DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
    * After the flashing is finished, shut down the computer. Then power on again and go into BIOS, Load Defaults, Save and Exit. 


Warning:
**Do not restart or interrupt your PC while the flash is ongoing
**Do not Flash BIOS on overclocked settings
**It is always recommended to power-down after flash