Gigabyte GA-108 REV.2
Logs
typeType
Floppy controller Multi I/O IDE controller
interfaceInterface
signalSignaling
32-bit PCI 8-bit ISA
dimSlot height
1
datePCI ID
0640
chip Chips and specs
-> IDE ctrl.
CMD PCI0640 (MDMA 1 IDE controller)
-> Signal transmitter/receiver
UMC UM8667 (2 Port RS-232 Driver/Receiver)
-> Super I/O
UMC UM8663
MTL
Size: Half-length, full-height card
Data bus: 32-bit PCI
HadProblem
Hard drive supported: Four IDE(AT) drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives
portintI/O ports
1x 
  • 2x17 2.54mm pin header
1x 
  • 2x20 2.54mm pin header
1x 
  • DB-25
1x 
  • DE-9
1x 
  • 2x5 2.54mm pin header
powerPower connectors
Empty
wrench No card specific known issues
  • Faulty IDE Controller

The IDE controller(s) is known to be faulty, which may cause problems with IDE devices such as data corruption or lockups.

notes Notes

Exclusive for the Gigabyte GA-486IM Motherboard that has special ISA data connections within the PCI2 slot only and needs to be enabled in the BIOS.
Will not work on any other motherboard

Last updated 2024-12-29T21:23:17Z
biosc No BIOS files available
drv 1 driver available
Name
Version
OS support
Arch
Size
Filename
Name
Version
v2.09
OS support
MS-DOS NetWare Server 3 NetWare Server 4 OS/2 2.x SCO Unix - OpenServer Windows NT 3.1 Windows NT 3.5x
Arch
x86
Size
691.2KB
Filename
doc 1 card document available
Release date
File
Logs
Release date
1999
File
Logs
Chip
Release date
File
Logs
Chip
Release date
File
Logs
Chip
Release date
1994-10-10
File
Logs
Chip
Release date
File
Logs
image1 Image 1 of 4 (Microhouse)
image2 Image 2 of 4 (PC-history)
image3 Image 3 of 4 (PC-history)
image4 Image 4 of 4 (PC-history)

Disclaimer

The info found in this page might not be entirely correct. Check out this guide to learn how you can improve it.